产品介绍：
DHPCA-100提供了包括可变增益值从102到108V/A，可切换的直流/交流耦合，基准校正可调节偏压，使用快速光电二管可调整偏置电压，可切换10MHz和1MHz低通滤波器和具有手动和远程控制的功能。对于粗糙的紧凑的EMI shielded case ,DHPCA-100是理想的高速的能扩大使用范围的放大器。
产品应用：
光检测器放大器
快速电离检测
光谱学
示波器置放大器，A/D转换器和RF锁定放大器
技术参数：
| Model | DHPCA-100 | |||||||||||
| Performance Range | Low Noise High Speed | |||||||||||
| Transimpedance [V/A] | 102 | 103 | 104 | 105 | 106 | 107 | 103 | 104 | 105 | 106 | 107 | 108 |
| Bandwidth | 200 | 80 | 14 | 3.5 | 1.8 | 0.22 | 175 | 80 | 14 | 3.5 | 1.8 | 0.22 |
| Rise Time | 1.8ns | 4.4 ns | 25 ns | 0.1µs | 0.2µs | 1.6µs | 2.0ns | 4.4ns | 25ns | 0.1µs | 0.2µs | 1.6µs |
| Equ. Input Noise | 220 pA | 17 pA | 2.2 pA | 490 fA | 140 fA | 51 fA | 155 fA | 6.1 pA | 1.5 pA | 440 fA | 140 fA | 51 fA |
| Accuracy Performance | Gain ±1 % | |||||||||||
| Low Pass Filter | Switchable to 1 MHz, 10 MHz or full bandwidth | |||||||||||
| Output Performance | ±1 V @ 50 Ω load | |||||||||||
| Bias Voltage | ±10 V, max. 22 mA, connected to BNC-shield, switchable to GND | |||||||||||
| Power Supply | ±15 V, +110 mA/−90 mA | |||||||||||
| Control Interface | Opto-isolated digital inputs, TTL/CMOS compatible, analog offset control voltage input | |||||||||||
| Case | 170 x 60 x 45 mm (L x W x H), Weight 320 g (0.74 lb.) | |||||||||||
所有评论仅代表网友意见，与本站立场无关。