180FH凸緣中空型分割器中空内经∅60mm
此機種具有重負荷特性，可承受較大之垂直徑向或軸向壓力，為專屬設計工程師群，經歷多年針對盤式結構需要設計而成，其輸入出軸為面盤式設計，有凸緣中心、盤面螺孔、定位、銷孔，固定面寬大，可使平面度及穩固性，更具堅實平穩。最能適用於較大負荷之迴轉式圓盤驅動場合，此系列機種被廣泛使用在各類盤式加工機械，及類似機構之產業機械、自動化間歇驅動部、驅動圓盤。
180FH凸緣中空型分割器
This type, we have researched and developed for a long time which has high rigidity and various connections to tables, gears, sprockets and the other peripherals placed onto the output shaft face where in the center a hollow is provided to enable the connection with a foreign shaft as well.
In addition, the well-designed housings of this ensure an easy handling installation.
Ever sensitive to the users’ needs, we can assure that our index drives will satisfy those engaged in the assembly work.
180FH凸緣中空型分割器中空内经∅60mm
外型線圖
規格
項目 符號 單位 數值 出力軸容許徑向負荷 C1 kgf 1200 出力軸容許軸向負荷 C2 kgf 1500 出力軸容許力矩 Ts kgf-m 參考力矩表 入力軸容許徑向負荷 C3 kgf 1100 入力軸彎曲力矩 C4 kgf 1960 入力軸扭矩 C5 kgf-m 340 入力軸的GD2 (註1) C6 kgf-m2 0.39 定位分割精度 sec. ±30 重量 kg 220
- 入力軸的GD2是在停留範圍內的數值。
- C1~C5數值是達到安全係數=2時的數值。
*本公司保有圖面修改之權利，詳細規格請與本公司聯絡。
| 項目 | 符號 | 單位 | 數值 |
|---|---|---|---|
| 出力軸容許徑向負荷 | C1 | kgf | 1200 |
| 出力軸容許軸向負荷 | C2 | kgf | 1500 |
| 出力軸容許力矩 | Ts | kgf-m | 參考力矩表 |
| 入力軸容許徑向負荷 | C3 | kgf | 1100 |
| 入力軸彎曲力矩 | C4 | kgf | 1960 |
| 入力軸扭矩 | C5 | kgf-m | 340 |
| 入力軸的GD2 (註1) | C6 | kgf-m2 | 0.39 |
| 定位分割精度 | sec. | ±30 | |
| 重量 | kg | 220 |
- 入力軸的GD2是在停留範圍內的數值。
- C1~C5數值是達到安全係數=2時的數值。
*本公司保有圖面修改之權利，詳細規格請與本公司聯絡。
180FH凸緣中空型分割器中空内经∅60mm
Dimensions
Specification
Item Sym-bol Unit Value Allowable thrust load on output shaft C1 kgf 1200 Allowable radial load on output shaft C2 kgf 1500 Allowable torque on output shaft Ts kgf-m Refer torque table Allowable thrust load on input shaft C3 kgf 1100 Max. repetitive bending force on input shaft C4 kgf 1960 Max. repetitive torque on input shaft C5 kgf-m 340 GD2 of input shaft (Note1) C6 kgf-m2 0.39 Indexing accuracy sec. ±30 Weight kg 220
- GD2 of input shaft is a value in dwell range.
- Value of C1 to C5 are those obtained for safety factor=2.
*The company reserves the right to modify the drawings, detailed specifications, please contact us.
| Item | Sym-bol | Unit | Value |
|---|---|---|---|
| Allowable thrust load on output shaft | C1 | kgf | 1200 |
| Allowable radial load on output shaft | C2 | kgf | 1500 |
| Allowable torque on output shaft | Ts | kgf-m | Refer torque table |
| Allowable thrust load on input shaft | C3 | kgf | 1100 |
| Max. repetitive bending force on input shaft | C4 | kgf | 1960 |
| Max. repetitive torque on input shaft | C5 | kgf-m | 340 |
| GD2 of input shaft (Note1) | C6 | kgf-m2 | 0.39 |
| Indexing accuracy | sec. | ±30 | |
| Weight | kg | 220 |
- GD2 of input shaft is a value in dwell range.
- Value of C1 to C5 are those obtained for safety factor=2.
*The company reserves the right to modify the drawings, detailed specifications, please contact us.
所有评论仅代表网友意见，与本站立场无关。