广告招募

Heli-Coil螺纹套取出工具编号

2025年09月06日 10:42:21      来源:深圳市金永安实业有限公司 >> 进入该公司展台      阅读量:11

分享:

Heli-Coil Extracting Tools 取出工具 拔除工具 拔出工具 卸套器


螺纹套取出示意图
Occasionally Heli-Coil inserts must be removed。Inserts may be removed manually with little effort。This is done by inserting the blade of the extracting tool into the Heli-Coil insert so that the V section of the blade is toward the top end of the insert。 Strike the head of the tool with a light blow。Maintaining a steady pressure of blade against insert, turn the extracting tool counterclockwise until the insert is removed。

偶尔的情况下Helicoil螺纹套需要拆除,可以通过手动的方式将螺套轻易地拆掉。其原理是:将一个“V”字形的专用取出工具插入螺套,轻轻在工具头部敲一下,保持一个稳定的向下压力,然后反时针方向旋转工具,直至将螺套取出即可。其取出工具编号如下表所示:

Heli-COIL  Extracting TOOLs

Heli-Coil螺纹套取出工具编号
螺纹公称尺寸
螺套取出工具编号
英制
公制
 
#1
M2
1227-01
#2
M2.2
1227-02
#3~#8
M2.5-M4
1227-06
#10 ~ 3/8"
M5-M10
1227-6
7/16" ~ 1"
M11-M24
1227-16
1-1/8" ~ 1-1/2"
M27-M39
1227-24







Heli-Coil螺纹套其他相关工具:


Heli-Coil螺纹套去尾工具编号(公制)


Heli-Coil螺纹套手动插入工具编号(公制)


Helicoil螺套丝攻编号

版权与免责声明:
1.凡本网注明"来源:全球供应商网"的所有作品,版权均属于全球供应商网,转载请必须注明全球供应商网。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。