广告招募

矢量网络分析仪E8362A E8362B

2026年07月14日 09:38:37      来源:深圳市迈凯瑞仪器仪表有限公司 >> 进入该公司展台      阅读量:3

分享:

矢量网络分析仪E8362A E8362B

N5232A PNA-L 微波网络分析仪,20 GHz
N5231A PNA-L 微波网络分析仪,13.5 GHz
N5230A PNA-L 网络分析仪, 2 端口,高达 6, 13.5, 20, 40, 或 50 GHz网络分析仪
网络分析仪
N5231B PNA-L 微波网络分析仪,13.5 GHz
网络分析仪
N5234B PNA-L 微波网络分析仪,43.5 GHz
网络分析仪
N5235B PNA-L 微波网络分析仪,50 GHz
N5232B PNA-L 微波网络分析仪,20 GHz
PNA系列网络分析仪:

E8362B PNA 系列网络分析仪,10 MHz 至 20 GHz
E8363B PNA 系列网络分析仪, 10 MHz至 40 GHz

E8364B PNA 系列网络分析仪, 10 MHz 至 50 GHz
E8362A FNA 系列网络分析仪,45 MHz 至 20 GHz
E8363A PNA 系列网络分析仪,45 MHz 至 40 GHz
E8364A PNA 系列网络分析仪,45 MHz 至 50 GHz
E8361A PNA 系列网络分析仪,45 MHz 至 67G GHz

E8362C PNA 微波网络分析仪
E8363C PNA 微波网络分析仪
E8364C PNA 微波网络分析仪
E8361C PNA 微波网络分析仪
PNA 现在配有 256MB RAM
45 MHz 至 40 GHz
在测试端口处保持 123 dB 动态范围
138 dB 动态范围,可直接访问接收机
40 GHz 时在测试端口处保持 110 dB 动态范围
扫描速度 < 26 μs/点
COM/DCOM 和 SCPI 编程
支持 TRL/LRM 校准
Keysight E8363A 矢量网络分析仪已于 2003 年 6 月停产,有效支持日期截至 2008 年 6 月 19 日。
Keysight E8363A 矢量网络分析仪是 PNA 系列网络分析仪平台的成员,它具有高速度和高精度,能满足当前高频、高性能元器件的苛刻测试要求。PNA 系列提供快速扫描速度、宽动态范围、低迹线噪声和灵活的连通性,可应对各种测试挑战。

E8363A 为波导、晶圆上和夹具内器件提供 TRL/LRM 校准(使用四接收机),为有源器件和扩展动态范围测量提供可选的源衰减器、偏置 T 型接头和接收机直接访问。

功能的自动化和自助工具使仪器能很好适应研发和生产制造的需要。PNA 系列有 16 个独立测量通道,内置硬盘,并提供鼠标。
您是否经常花费大量的时间来比较租赁与购买决策。我们销售工程师为您提供专业知识,使您更容易做出决策,我们可以帮助您了解租用测试测量设备与购买的好处。

基于我们专业的电测设备租赁的分析,数据表明,当考虑所有因素(包括原始购买 价格和其他相关成本)时,全部成本通常是原始购买价格的两倍以上。
这些因素包括:
采购过程中花费的时间
设备维护、校准和维修
折旧和税收
资产管理、跟踪和存储
人工和管理费用
报废处理或升级旧设备
因此,在能满足测试需求的情况下,我们鼓励您,网络分析仪租赁视为可行且通常更为便宜的选择,在大多情况下, 如果计划使用期限少于3年,租赁往往成为更好的选择。

三、迈凯瑞仪器租赁事业部为了能够限度的满足客户的需求,提供多种仪器租赁模式
短期租用
适合短期或紧急项目,便于业务主管迅速决策。选择适合的短期租期,低至1周的租 金,无需承担维护费用。
长期租用
无需投入大量资金,无需前期成本,降低投资风险。按6、12、18、24个月租期,租金优惠比例递增。
先租后买
可自行选择租期,原租期过半后可选择购买设备。所买设备可根据客户需求提供三个月至一年质保。
回购/回租
将闲置仪器可出租或出售给迈凯瑞仪器测试,盘活资产使其得到良好的利用与回报。

Keysight PNA Series Network
Analyzers
E8362B/C 10 MHz to 20 GHz
E8363B/C 10 MHz to 40 GHz
E8364B/C 10 MHz to 50 GHz
Definitions
All specifications and characteristics apply over a 25 °C ±5 °C range (unless otherwise stated) and 90 minutes after
the instrument has been turned on.
Specification (spec.): Warranted performance. Specifications include guardbands to account for the expected
statistical performance distribution, measurement uncertainties, and changes in performance due to environmental
conditions.
Characteristic (char.): A performance parameter that the product is expected to meet before it leaves the factory, but
that is not verified in the field and is not covered by the product warranty. A characteristic includes the same
guardbands as a specification.
Typical (typ.): Expected performance of an average unit which does not include guardbands. It is not covered by the
product warranty.
Nominal (nom.): A general, descriptive term that does not imply a level of performance. It is not covered by the
product warranty.
Calibration: The process of measuring known standards to characterize a network analyzer's systematic (repeatable)
errors.
Corrected (residual): Indicates performance after error correction (calibration). It is determined by the quality of
calibration standards and how well "known" they are, plus system repeatability, stability, and noise.
Uncorrected (raw): Indicates instrument performance without error correction. The uncorrected performance affects
the stability of a calibration.
Standard: When referring to the analyzer, this includes no options unless noted otherwise.


版权与免责声明:
1.凡本网注明"来源:全球供应商网"的所有作品,版权均属于全球供应商网,转载请必须注明全球供应商网。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。