图中所示量规塞处于检验状态。当柱塞处于静止状态时,W面应比V面缩进更深些。
Reference 尺寸符号 | Dimension 尺寸(mm) | Tolerance 公差(mm) | Reference 尺寸符号 | Dimension 尺寸(mm) | Tolerance 公差(mm) |
D | 39.6 | +0.0/-0.02 | J2 | 65 | +0.0/-0.03 |
F | 40 | +0.0/-0.02 | M | 40 | +0.02/-0.0 |
G | 52 | +0.0/-0.02 | N | 49 | +0.02/-0.0 |
H | 22 | +0.1/-0.1 | O | 52.5 | +0.01/-0.0 |
J1 | 58 | +0.0/-0.02 | T | 34 | +0.03/-0.0 |
Purpose目的:
To check lamp dimensions for contact making in IEC holders.
检验灯在灯座中有关接触性能的尺寸。
Testing 测试方法:
The shape of the lamp with regard to the fit in the lampholder is assured to be correct. If the lamp can be pushed into the gauge till plane W reaches plane V or project beyond it.
当成品灯的灯头插入量规时,塞柱的W面应与V面共面或凸出V面。
产品图片:
所有评论仅代表网友意见,与本站立场无关。