Protectoseal系列号18540，管道客场压力/真空保护通风，目的是提供应用，需要将有害蒸气管道走，而不是释放到大气压力和真空救济。在发泄住房允许在坦克的空气和蒸气逸出量在正常呼吸，然后把托盘。打开和关闭托盘只允许摄入量或出口救济必要保持在允许的工作压力，避免油箱损坏。缓解蒸气会通过管道法兰连接了一个尺寸比进口提供更大的流动能力更大。
产品规格表 - PDF格式。（西班牙语|中文）.
安装及维修指南 - PDF格式。（西班牙语|中文）.
尺寸2“（DN50的）到12"（DN的300）。
连进，出口车型也可提供。
设置达到负重。
减少昂贵的蒸发损失。
非金属（热塑性树脂及玻璃钢）型号。
较高的压力/真空设置可用。
ProFlow ®尺寸/选型软件。
纯科技®设计的高纯度的应用。
砖利，配屋电影“气垫座位".
低泄漏托盘设计 - 。认证测试报告。
“蒸汽护套"可用。
与欧洲ATEX 94/9/EC指令符合。
PIPE-AWAY PRESSURE / VACUUM CONSERVATION VENT
Series No. 18540
Protectoseal Series No. 18540, Pipe-Away Pressure / Vacuum Conservation Vent, is designed to provide pressure and vacuum relief in applications that require hazardous vapors to be piped away, rather than released into the atmosphere. The pallets in the vent housing allow intake of air and escape of vapors as the tank normally breathes in and out. Pallets open and close to permit only that intake or outlet relief necessary to remain within permissible working pressures and avoid tank damage. Relieving vapors may be piped away through a flanged connection one size larger than inlet providing greater flow capabilities.
- Product Specification Sheet - PDF ( Spanish | Chinese )
- Installation & Maintenance Instructions - PDF ( Spanish | Chinese )
- Sizes 2" (DN 50) through 12" (DN 300)
- Even inlet-outlet models also available
- Settings achieved by weight loading
- Reduces costly evaporation losses
- Non-metallic (Thermoplastic Resin & FRP) construction available
- Higher pressure / vacuum settings available
- ProFlow® Sizing/Selection Software
- Pure-Tech® Design- high purity applications
- Patented, FEP Film "Air-Cushioned Seating"
- Low-leak pallet design - certified test reports
- "Steam-Jacketing" available
- Conforms with European ATEX Directive 94/9/EC
所有评论仅代表网友意见，与本站立场无关。