产品简介
采用的MSRS参比标准内置技术,检测气体中的微量氧。的半抽取式安装方式,直接测量高温烟气,表现要远比插入式的优异,同时比抽取式要便宜而且简单,抗污染能力强
详情介绍
Product Features
- Reliable and repeatable measurements
- Simple to maintain, easy to calibrate
- Robust design
- Quick and easy to install
- Simple to use
Technical Specification |
Sensor Type | XZR-500-ST + XCU-500-WM | Measurement Principle | Zirconium Oxide Sensor with Metallic Sealed Reference and K Type T/C | Performance | Gas | Wet, dirty and hot | Measurement Range | 0.01-25% Oxygen | Accuracy | <2% relative with atmospheric pressure compensation | Response Time | < 15s for 90% of response step from calibration gas inlet | Repeatability | ±0.1% | Fidelity | 1% per month | Linearity | Better than ±1% | Sample Flow Rate | Flue Gas at 0.5 m/s minimum rate | Maximum Sample Pressure | Depending on application | Maximum Sample Temperature | Up to 1300°C on request | Outputs | Output Signal | One off 0/4 to 20 mA linear with Galvanic Insulation Output; 2nd optional output | Output Load | Over 1000 Ω | Self-diagnostics | Included in Readout | Output Ranges | Freely configurated between 0.01-25% | Alarms | 2 Alarms; User adjustable (10 W) 1 Fault Alarm | Display Resolution | 0.1% in standard; (0.01% on request) | Power Supply | 115 or 220 VAC, 50/60 Hz | Power Consumption | 110 VA | Ambient Temperature Range | 0°C to 55°C | Sensor Temperature | 600 to 800°C, optimised at 700°C | Operating Humidity | 5-90% RH without condensation | Physical | Dimensions | 300 x 300 x 200 mm (Control) 290 x 135 x 650 mm (Sensor) | Weight | 10 to 15kg depending on application | Wetted Materials | XZR-501- 304 L Stainless steel (700°C) XZR-502- Inconel 600 (1000°C) XZR-503- HR160 (600°C to 1000°C) XZR-504- C2000 (600°C) XZR-505- Halar coating (120°C) XZR-506- Ceramic (1300°C) | Probe Dimensions | Length 400mm, other on request | Installation | Stack and wall mounting | Housing Ingress Protection | Weatherproof |
|
- 上一篇: 露点校验系统
- 下一篇: 露点校验仪
所有评论仅代表网友意见,与本站立场无关。